features: ? superior jitter performance (comparable to saw based) ? frequencies from 150 mhz to 1.4 ghz ? designed for a short 2 week cycle time applications: ? telecommunications such as sonet / sdh / dwdm / fec / serdes / oc-3 thru oc-192 ? wireless base stations / wlan / gigabit ethernet ? avionic fight controls and military communications mtronpti corporate headquarters 100 douglas avenue po box 630 yankton, sd 57078-0630 1-800-762-8800 www.mtronpti.com introduces m210x series pecl/lvds/cml clock oscillator featuring qik chip tm technology
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. m210x series pecl/lvds/cml clock oscillator C 3.3/2.5/1.8 volt C 5x7 mm product specifcations product features: ? superior jitter performance comparable to saw-based products (0.30ps typical at 622.08 mhz) ? frequencies from 150 mhz to 1.4 ghz ? crystal resonator based product offering far better stability than saw (+/-20ppm) ? designed for short cycle time manufacturing (2 weeks or less) ? 0.01 f bypass capacitor from vcc to ground built into 5x7 package description: the m210x series oscillators are high performance pecl, lvds, or cml output oscillators featuring exceptional per - formance while addressing the demands for shortened manufacturing cycle times. applications: ? telecommunications such as sonet / sdh / dwdm / fec / serdes / oc-3 thru oc-192 ? wireless base stations / wlan / gigabit ethernet ? avionic fight controls and military communications ? test equipment and instrumentation part number example: m210 0 6 8 b p n 622.080000mhz part number example: m210068bpn C 622.080000 mhz ordering information: 2
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. 3 m210x series pecl/lvds/cml clock oscillator C 3.3/2.5/1.8 volt C 5x7 mm applications note: the mtronpti m210x series of clock oscillators, featuring qik chip tm technology, provides for extremely low jitter of 0.30 ps rms. for applications requiring low jitter, frequencies from 150 mhz to 1.4 ghz are available. lvpecl, lvds, or cml compatible outputs, as well as operating voltage of 1.8 v, 2.5 v, and 3.3 v are also options on the m210x. the m210x is available at a stability of 20 ppm, all-inclusive, over the industrial operating temperature range of -40c to +85c. by providing this specifcation, the m210x will perform at a much superior level than saw based oscillator designs (figure 1). this level of performance is achieved by utilizing a precision at-cut crystal. an enable/disable function is also an available option on the m210x. the internal 0.01 f by-pass capacitor also assures optimum noise suppression on the supply voltage pad. the superior integrated jitter performance of 0.3 ps rms makes the m210x suitable for 10 gig-e, broadband networks, network switches, sonet, sdh, serdes, dwdm, fec, wlan, and oc-3 thru oc-192 systems. the m210x is available in a nine-pad, 5x7x1.9 mm, leadless, ceramic, surface mount package (see page 4) that is rohs and 260c refow compatible. (no pcb traces should be located directly under the 5x7 product). figures 2 and 3 below show load termination conditions for lvpecl and lvds. the m210x oscillators offer a pin 1 tristate for backward compatibility to many of the existing products in the industry from vectron, epson, and others. for superior performance in a high frequency clock oscillator, the m210x is a logical choice for designers. the unique design architecture allows the m210x fast turn around on engineering design samples, as well as production quantities in 2 weeks or less. figure 1. frequency/temperature curves, m210x vs. saw based oscillator devices figure 2. 3.3v lvpecl load circuit figure 3. lvds load circuit
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. 4 m210x series pecl/lvds/cml clock oscillator C 3.3/2.5/1.8 volt C 5x7 mm performance characteristics:
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. 5 m210x series pecl/lvds/cml clock oscillator C 3.3/2.5/1.8 volt C 5x7 mm product dimensions & pinout information: handling information: although protection circuitry has been designed into the m210x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (esd) during handling and mounting. mtronpti utilizes a human-body model (hbm) and a charged-device model (cdm) for esd-susceptibility testing and protection design evaluation. esd voltage thresholds are dependent on the circuit parameters used to defne the mode. although no industry-wide standard has been adopted for the cdm, a standard hbm (resistance = 1500 ? , capacitance = 100 pf) is widely used and therefore can be used for comparison purposes. the hbm esd threshold presented here was obtained using these circuit parameters.
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. 6 m210x series pecl/lvds/cml clock oscillator C 3.3/2.5/1.8 volt C 5x7 mm solder profle: quality parameters:
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. 7 m210x series pecl/lvds/cml clock oscillator C 3.3/2.5/1.8 volt C 5x7 mm tape and reel specifcations: output waveform: lvds/cml/pecl
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. 8 m210x series pecl/lvds/cml clock oscillator C 3.3/2.5/1.8 volt C 5x7 mm orlando 2525 shader rd orlando, fl 32804 usa phone: 407-298-2000 fax: 407-293-2979 email: salesorl@mtronpti.com yankton po box 630 yankton, sd 57078-0630 usa phone: 605-665-9321 toll free: 800-762-8800 fax: 605-665-1709 email: salesykt@mtronpti.com san jose 985 university ave suite 38 los gatos, ca 95032 usa phone: 408-395-0700 fax: 408-395-8074 email: salesca@mtronpti.com europe the netherlands phone: 31-40-368-6818 fax: 011-31-40-368-3501 email: saleseu@mtronpti.com asia pacifc 1104 shanghai industrial investment building 48-62 hennessy road wanchai, hong kong, china phone: 852-2866-8023 fax: 852-2529-1822 email: saleshk@mtronpti.com connecticut 755 main street suite 2b, building 2 monroe, ct 06470 usa phone: 800.762.8800 fax: 203.452.9435 email: milsales@mtronpti.com
|
